The obsolete computer parts sarcophagus (or coffee table if you prefer)

A close up of the finished table with its lighting on.

I’ll admit I’m a bit of a hoarder when it comes to computer parts. Over the years, I have collected a fair amount of equipment with the hope than one day, some of it might come handy. Well, a GeForce 3 from 2002 is not like wood scraps or loose electric cables, the more time passes, the more it becomes useless. Standards evolve and with them connectivity; there is just no way this type of video card will fit in a modern computer (now that everyone uses laptops too). I have had a need for small servers for some projects and an old PII with linux on it would have made a perfect candidate, but then again, the power consumption of those machines are just not worth it. A small embedded computer or shared hosting would pay itself back in no time.

One day, I came across this project through Make and thought it would be a perfect way to give purpose to all that junk, especially that like the inventor of the first table, some of it was from my first machines and while it was now devoid of computational value, still retained sentimentality. Electronic circuits have a mesmerizing power for the knowledgeable and the profane likewise. While staring at an A7N8X for hours will not give the non-engineers any further understanding on how bits are turned into pretty pictures on a monitor, it could nonetheless spark educative discussions on the general role that it plays into this process and at least help dissipate the “black box” effect of modern personal computers. So I proceeded to file the link in my ideas folder, knowing I was then lacking the woodworking skills and tools required for this type of project, and at the time not really thinking I would ever come to have my own computerpartscoffeetable.

A CAD plan of the table. Save a few millimeters, the end result is the exact same.

Coming back from some time in Europe and having only worked with my brain for over a year (except for this project), the time felt right for a physical challenge. Drawing inspiration from this other computer parts table, I opened FreeCAD, got drawing and in an evening came up with a design of my own: something less imposing, with more modern lines, all without sacrificing the “sarcophagus” effect.

This is not a how-to so I will spare the building details but for those that are interested, feel free to download the CAD file, leave a comment or write me. Basically, the table is build around a frame of particle board which also serves as the bed for the parts. At both ends of the frame are two dark walnut glue-ups with some chamfering all finished with several coats danish oil. Frankly I was not expecting the end-result to be so stunning, the images do not do it justice. The panes of glass fit in a grove carved in the leg members and with the top glass being 10mm (3/8), this makes one solid and stiff piece of furniture. It takes two fully gown men to move it around.

The table is lit up from two led strips at a 45 degree so they can illuminate both the top and their respective side. Powering the strip is the actual only functional circuit of the whole display: a switching power supply I built for the occasion (also something that had been sitting on a shelf for a couple of years).

Money-wise, the project was a bit on the expensive side. I did maximize reuse and recycling, but as every woodworker will confirm, precious wood will cost you, in fact a lot more that what is normally found in hardware stores. Add to the total the price of thick custom cut glass panels and the addition is somewhere around 400$. A coffee table at Ikea is a tenth of that price, but the commonalities ends with function: there is nothing like the quality, craftsmanship, the beauty of a solid piece of wood furniture.

Since I am travelling again and did the finishing touches the day before my departure, I cannot provide a picture with a few happy people around some empties. For now, it is quietly sitting in my workshop under a protective blanket, patiently awaiting my return for merry moments with friends or a lazy coffee the Sunday morning after.

8 Replies to “The obsolete computer parts sarcophagus (or coffee table if you prefer)”

  1. hi there i really want to rebuild your table for my new home so is it possible to get a plan of your’s?

    greetings from germany.

  2. I built the plans using FreeCAD so I could send you the source files. If your are not used to working with CAD software, I could also send you measurements and pictures. In either case, write me using the contact form and I will be glad to help you out.

    Thanks

  3. Hello,
    this is imaging , i want to build it at my room :)
    can you please send me the plan or the cad file

    thanks

Leave a Reply

Your email address will not be published. Required fields are marked *